IP addresses

Starting from Feb 1, 2021, we send requests from the following ranges:
Note: These are not the usual /24 ranges!

104.224.12.0/22
168.119.133.64/27
188.34.148.112/28
188.34.148.128/25
188.34.149.0/27

They're static and used exclusively by Prerender.io.

Some providers doesn't allow to set arbitrary ranges. Use these if you can only set /8, /16/ and /24 ranges

104.224.12.0/24
104.224.13.0/24
104.224.14.0/24
104.224.15.0/24
168.119.133.64/24
188.34.148.112/24
188.34.148.128/24
188.34.149.0/24

Our EU cluster may also send requests using IPv6, here are the current aggregated ranges:

2a01:4f8:10a::/48
2a01:4f8:10b::/48
2a01:4f8:120::/48
2a01:4f8:13a::/48
2a01:4f8:13b::/48
2a01:4f8:140::/48
2a01:4f8:141::/48
2a01:4f8:160::/48
2a01:4f8:172::/48
2a01:4f8:201::/48
2a01:4f8:211::/48
2a01:4f8:212::/48
2a01:4f8:231::/48
2a01:4f8:241::/48
2a01:4f8:242::/48
2a01:4f8:251::/48
2a01:4f8:a0::/48
2a01:4f9:2a::/48
2a01:4f9:3a::/48
2a01:4f9:4a::/48
2a01:4f9:4b::/48

These subnets could be shared with our vendor's other customers.

We have a mix of servers in the US and Europe. Paid customers can request rendering from our US cluster only if you don't want to permit IPv6 subnets from your side.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.